SAUNA S-LINE 165 VEDA

This modern Finnish sauna with built-in starry sky fits perfectly into sleek, modern interiors. Due to the sauna's rectilinear design, it is suitable both as a freestanding version and as a built-in version. The built-in starry sky with colour therapy ensures ultimate relaxation. The interior of the S-Line Veda is made of hemlock or red cedar (additional cost) with an antibacterial effect. Its compact dimensions make this sauna easy to install in small spaces and you only need two normal (230 V) sockets for connection.

Attractive, advanced lighting plan

This sauna comes with a very attractive and sophisticated lighting plan as standard. You can easily choose any colour, dimmed or illuminated, as you wish. Soothing green, cool blue, energetic red or warm yellow: all variations are possible. We've pre-installed a starry sky on the sauna ceiling. We've installed indirect lighting behind the backrest and under the bench. Here, too, you can relax and enjoy every sauna session.

Installing your SuperSauna®

Thanks to the prefabricated elements, assembly is very simple and can even be carried out by a layman. Simply assemble the prefabricated elements and fit a door. Our clear assembly instructions make it easy.

The fixing points for benches, backrests and other elements are already pre-assembled. You don't need to measure anything. Just hang and screw. The LED starry sky and the indirect lighting behind the backrests and under the bench are already installed and ready to plug in. Now all you have to do is plug them in.

You can see how all SuperSauna cabins are installed here. The video shows the 2 Trendy cabins.

Our stoves

It is often thought that the larger the oven, the higher the temperature reached and the faster the cabin heats up. This is only partly true. It's important that the heater is adapted to the size of the cabin. The kilowatt output of a sauna heater always depends on the volume in m³ present. Yes, a heater that's too small is a mistake, but a heater that's too big is also a mistake. If the heater is too small, it's constantly flooded and doesn't reach temperature. If the oven is too large, it is constantly underloaded, receives too little supply air, stops constantly and also fails to bring the cabin up to temperature.

This is a tried and tested heating appliance that is the most widely used:

Electric sauna heater 3.6 kW 230 volts with internal controls for wall mounting (left)

• NARVI MINEX

• Power rating: 3.6 kW

• Connection : 230 volts

• Operation: Internal control with 2 buttons 1. temperature / 2. time

• Oven dimensions: 330 mm x 630 mm x 200 mm (width / height / depth)

  Cable and stones included

Electric sauna heater 4.5 kW / 6 kw / 9kW - 380 volts with internal controls for wall mounting (centre)

• NARVI NM

• Power: 4.5 kW / 6 kW / 9 kW

• Connection: 380 volts

• Operation: Internal control with 2 buttons 1. temperature / 2. time

• Range dimensions: 430 mm x 580 mm x 300 mm (width / height / depth)

  This oven is not available because the volume is too large.

Electric sauna heater 4.5 kW / 6 kw / 9kW - 380 volts with internal controls for frame mounting (right)

Corresponds to the wall-mounted heater. Only one heater support is supplied and the heater is mounted in the heater support.

• NARVI NM
• Output: 4.5 kW / 6 kW / 9 kW
• Connection: 380 volts three-phase current
• Operation: Internal control with 2 buttons 1. temperature / 2. time
• Stove dimensions: 430 mm x 580 mm x 300 mm (width / height / depth)
• Cooking grid dimensions: 630 mm x 555 mm (+ 4 adjustable feet approx. 65 mm long) x 405 mm (width / height / depth)

This oven is not available because its volume is too small.