FINNISH SAUNA - INFRAPLUS™ GEROMIN 150

Finnish sauna Geromin 150

This modern Finnish sauna with built-in starry sky fits perfectly into a sleek modern interior. The sauna's rectilinear design makes it suitable both as a freestanding variant and as a built-in variant. The built-in starry sky with colour therapy ensures ultimate relaxation. Geromin Finnish saunas are made of antibacterial red cedar wood. Its compact dimensions make this sauna easy to install in small spaces and you only need two normal (230V) sockets to connect it.

Attractive and advanced lighting plan

This sauna comes with a very attractive and sophisticated lighting plan as standard. You can easily set any colour, muted or illuminated, whatever you want. Soothing green, cool blue, energetic red or cosy yellow: all variations are possible. In the ceiling of the sauna, we preinstalled a starry sky. We installed indirect lighting behind the backrest and under the bench. Here, too, you can relax and enjoy every sauna session.

Our offered stoves

It is often assumed that the bigger the oven, the higher the temperature reached and the faster the cabin is up to temperature. This is only partly true. It is important that the heater matches the volume of the cabin. The kilowatt output of the sauna heater always depends on the volume m³ present. Yes, a furnace that is too small is wrong, but a furnace that is too big is also wrong. If the furnace is too small, it is constantly flooded and does not reach temperature. If the furnace is too big, it is constantly underloaded, gets too little supply air, constantly shuts down and also does not bring the cabin up to temperature.

Proven, tried and tested and most widely used furnace:

Electric 3.6 kW 230 volt sauna heater with internal controls for wall mounting (left)

• NARVI MINEX
• Output: 3.6 kW
• Connection: 230 volt
• Operation: Internal control with 2 buttons 1. Temperature / 2. Time
• Oven dimensions: 330 mm x 630 mm x 200 mm (width / height / depth)

Cable and stones included

Electric 4.5 kW / 6 kw / 9kW - 380 volt sauna heater with internal controls for wall mounting (centre)

• NARVI NM
• Output: 4.5 kW / 6 kW / 9 kW
• Connection: 380 volt
• Operation: Internal control with 2 buttons 1. Temperature / 2. Time
• Dimensions stove: 430 mm x 580 mm x 300 mm (width / height / depth)

This oven is not offered because the volume is too small

.

Electric 4.5 kW / 6 kw / 9kW - 380 volt sauna heater with internal controls for frame mounting (right)

Corresponds to the wall-mounted stove. Only a stove rack is supplied and the stove is mounted in the stove rack.

• NARVI NM
• Power output: 4.5 kW / 6 kW / 9 kW
• Connection: 380 volt three-phase current
• Operation: Internal control with 2 buttons 1. Temperature / 2. Time
• Stove dimensions: 430 mm x 580 mm x 300 mm (width / height / depth)
• Dimensions stove rack: 630 mm x 555 mm (+ 4 adjustable feet approx. 65 mm long) x 405 mm (width / height / depth)

This oven is not offered because the volume is too small.

Installation of your SuperSauna®

Assembly is kept very simple by prefabricated elements and is feasible even for a layman. All you need to do is assemble the pre-assembled elements and install a door. You do this easily with our clear assembly instructions.

The points where benches, backrests and other parts should be attached are already pre-assembled. You no longer need to measure anything. Just hang and screw on. The LED starry sky, indirect lighting behind the backrests and under the bench are already installed and ready to plug in. All you have to do is plug them in.

Here you can see how all SuperSauna cabins are installed. The video shown is about the 2 Trendy.