COMBINATION SAUNA 211 VALERO+ BUILT-IN

Combination Sauna / Infrared Sauna Infraplus™ 211 Built-in Valero

Besides these positive effects on the body and mind, you can also make the sauna a real feast for the eyes. You can fully integrate the sauna into your interior. The linear design and large glass front make the Valero models wonderful to install. It can be attached to the frame of the front or something can be placed on top of it. Installing this modern infrared cabin from SuperSauna® creates a very luxurious atmosphere. Thus, you not only enjoy the sessions in the infrared cabin, but also the view. Many different sizes are available at SuperSauna®, so you don't have to have an expensive cabin custom-made. This cabin is always white on the outside. So the cabin is neutral and can be combined & integrated as desired. The exact colour is RAL 9003 white matt.

What should I consider when installing an infrared cabin? There are 2 options for installation. We will be happy to advise you further.

Our cabins are screwed in from the outside as standard and can be slid into an existing niche. To slide the cabin into the niche, we recommend adding 3 to 5 cm extra to the cabin dimensions, so that the cabin can be slid in easily and without clamping.

If the cabin cannot be mounted in front of the niche, it can also be mounted from the inside with 90° brackets. The brackets are not supplied, but are available in any major DIY store. The corners are recommended at the level of the roof insert, just below the bench seat and at floor level and are thus invisible afterwards. An additional space of approx. 3-5 cm is also recommended here.

The infrared cabin's technology is located in the roof and must remain accessible. If you install the cabin and the cabin is no longer accessible from the rear either, a maintenance flap should be fitted at the top. You can also make the lining above the infrared cabin removable so that this upper lining can be removed if necessary.